Features Specifications Appliaction Download
Products Industrial Communications Serial Device Servers 2 port Serial Server
SDS243A 2-ports RS232/485/422 to TCP/IP Serial Server
SDS243A
SDS243A 2-ports RS232/485/422 to TCP/IP Serial Server

The SDS243A serial server is a protocol converter between two serial ports (RS232/485/422) and TCP/IP. It supports Modbus TCP to Modbus RTU conversion.

It features two serial ports—supporting RS232 and RS485/RS422 (RS422 support must be specified at the time of order; it is not included by default)—which connect to the SDS243A, enabling simultaneous full-duplex operation for both ports. The RS485 interface uses a green terminal block, while the RS232/RS422 interfaces utilize RJ45 connectors.

Additionally, the SDS243A includes an extra Ethernet port, which can function as a network switch or be used for cascading. Through this cascading port, the device can be expanded to support 4, 6, or 8 serial ports. Power can be supplied via either a DC power jack or a terminal block; the device supports a wide voltage range and includes a chassis ground connection for protection.


Features

Technical Features

  • Both serial ports support RS232, RS485, and RS422 standards (RS422 requires ordering the 5243A-422 model).

  • The two serial ports operate independently in full-duplex mode without mutual interference and can be configured with different baud rates.

  • The dual Ethernet ports function as a network switch.

  • Comprehensive LED indicators are provided, with dedicated TCP connection and data activity indicators for each serial port.

Software Features

  • Supports TCP Server, TCP Client, UDP, and UDP Multicast modes. In TCP Server mode, it supports up to 10 simultaneous TCP connections.

  • Baud rates range from 1200 to 460,800 bps; data bits can be set from 5 to 9; parity options include None, Odd, Even, Mark, and Space. It also supports CTS/RTS hardware flow control and XON/XOFF software flow control.

  • Includes a feature to transmit the device's MAC address upon connection, facilitating cloud-based device management. Provides a software development kit (SDK) in the form of a DLL for PC-based device discovery and configuration.

  • Supports dynamic IP acquisition via DHCP and domain name resolution using the DNS protocol.

  • Enables remote discovery and configuration of device parameters via the cloud.

  • Allows for remote monitoring of device TCP connection status through software; includes data monitoring functionality for virtual serial ports.

  • The SDS243A supports Modbus gateway functionality, enabling conversion between Modbus RTU and Modbus TCP.

  • The SDS243A supports multi-host operation: in a request-response communication mode, it allows multiple computers to access the same serial device simultaneously via the network interface.

SDS243A 3.png

Specifications
ItemSpecification
OutlineInterface485:   Terminal block; 232: RJ45 (Optional RJ45-to-DB9 cable available.); 422: RJ45
Power Supply5.5mm, inner positive outer   negative, standard power jack; terminal block
Case materialMetal
Dimensions L × W × H94x65x25mm
Communication   InterfaceEthernet2 ports x10M/100M, Can be   connected to any., 2kV surge protection
Serial Port2 ports ×   RS232/485/422, RXD, TXD, GND, CTS, RTS
Serial Port ParametersBaud   Rate1200~460800 bps
ParityNone, Odd   parity, Even parity, Mark, Space
Data Bits5~9 bits
Flow ControlRTS/CTS, None
SoftwareProtocolsETHERNET, IP,   TCP, UDP, HTTP, ARP, ICMP, DHCP, DNS
Configuration MethodZLVirCOM tool,   Device Management Libraries
Communication ModeSocket, Virtual   Serial Port, and Device Management Libraries
Operating ModesTCP Server, TCP   Client (TCP Server can run simultaneously), UDP
Power RequirementsPower   Supply9~24V DC, 2~4W
Environmental RequirementsOperating   Temperature-40~85℃
Storage Temperature-45~165℃
Humidity Range5~95% RH   (Relative Humidity)


Application

Suitable for applications such as:

  • Power electronics, smart instrumentation, and energy consumption monitoring;

  • IoT gateways serving as a communication bridge between devices and the cloud;

  • Remote monitoring and program downloading for various automated PLCs;

  • Communication interfaces between various SCADA/HMI software and hardware devices;

  • Network connectivity for equipment in access control and security systems;

  • Data acquisition and network connectivity for medical equipment.