Product Name:SVC100 AC Servo Acionamentos
The Servo Acionamentos  SVC100 is High Precision.High Response. Cost Effective; 
Power ranges from 0.1kW-3.5kW 
- Wide speed range, the maximum is 6000r/min
- High precision positioning, can reach 0.009
- High reliability, all use international brands IC
- Fast response frequency, strong overload capacity, no overshoot
- Low Frequency, large torque output
- Anti-interference and self-protection are strong
- The German instrument motor control dedicated floating-point processor, speed of operation is high to 150MHZ
- Support RS458, Can, USB etc, ports
- The ATE automatic detection System, the product quality is reliable
- Card type ultrathin structure, the appearance is beautiful, structure is compact.
- According to the customers requirement, develop to meet the needs of customers.

Spetification Servo Acionamentos SVC100

Control ways 1.position control
2.speed control
3.torque control
4. Various combinations of control
Feedback type 1. Incremental square wave
2.cosine type
Using condition using/saving temperature 0~+55°C/20~+85°C
using/saving humidity less than 90%RH
Vibration resistance/Impact resistance 4.9m/s2/19.6m/s2
Performance speed control range 3.513888889
Speed changing ratio load changing ratio  0-100% load:less than 0.01%
voltage ratio rated voltage ±10%: 0%(in the rated speed)
temperature changing ratio 25±25°C: less than ±0.1%(in the rated speed)
Frequency performance 1KHz(JL = JM)
Torque control accuracy ±2%
Soft start time setting 0~10s
Input signal speed command and torque command input command voltage DC 10V variable setting range/rated speed or rated torqueInput voltage:maximum,positive instruction when motor rotates in the positive direction
Input impedance about 14kΩ
the circuit time constant about 47μs
Contact speed instruction Rotation direction selection using P action signal input
Speed selection using/SPD-A/SPD-B/SPD-D to choose motor direction rotation speed
Performance offset setting 0~450 r/min(Set the resolution 1 r/min)
feedback compensation 0~100%(Set the resolution 1%)
positioning completed width setting 0~250 instruction unit (Set the resolution 1 instruction unit)
Input signal instruction pluse input pluse kinds 1. Symbol+pluse sequence 2. CW+CCW pluse sequence
3. phase difference is 2 phase pluse (A phase and B phase)
Input pluse status Differential drive(5V);
Open collector(5V, 12V, 24V)
Input pluse Frequency Differential drive: maximum 1MHz
open collector: maximum 200kHz
control signal clear signal(input pluse status is the same as instruction pluse)
position output output status Aphase Bphase Zphase, Differential drive output
  requency division ratio any frequency division
input signal in order can conduct signal distribution's change servo ON,P action (or control mode switch,switch the motor’s positive rotation or reverse rotation by the internal speed setting,zero clamp,instruction pluse prohibited) prohibit positive drive(P-OT) prohibit reverse drive(N-OT),alarm reset,current limit at positive side, current limit at reverse side(Internal speed selection)
output signal in order fixed output servo alarm
can conduct signal distribution’s change select 3 signals from positioning completed(same speed),motor rotating,servo ready,current limiting,speed limiting, release the brake,alarm,NEAR signal
Dynamic brake function the main power OFF,servo alarm,servo OFF, action when overtravel
The electronic gear 0.001B/A4000
Protection function over current,lack voltage,overload, abnormal regeneration,main circuit detection abnormal, Heat sink overheat,power lack phase,overflow,overspeed,encoder abnormal,avoid the out of control,CPU abnormal,position offset,others
Analog monitoring functions built-in analog monitoring connector that can observe speed,torque instruction
Speed: 1V corresponding to 1000r/min
Torque: 1V/100% rated torque
Position offset pluse:0.05V/1 instruction unit or 0.05V/100 instruction unit
Communication function communication type CAN, RS485, USB
Shaft address setting set according to the user parameters
1: N communication RS-485 port can connect the maximum of 255 stations
Functions status display,the user parameters setting Monitoring display,alarm tracking display,JOG operation and automatic tuning operation,speed,torque instruction signal,etc
Others the origin retrieval, the motor’s automatic identification function. Power’s high harmonic suppression
Máquinas-ferramentas (metal formando, router CNC, de corte a laser, jato de água, processamento de madeira)
Máquina de matéria têxtil; Máquina de embalagem; Impressora; Eletrônica fabricação de equipamentos
Robô industrial, manipulador; Hybrid, Die-carcaça da máquina, máquina de moldagem por injeção, extrusão máquina de plástico
Conversores de frequência, Variadores de frequência, Inversores de Frequência, Inversores de Frequência Solar Fotovoltaico, Conversores de frequência do campo fotovoltaico, Servo acionamentos, Servo Acionamentos e Servo Motores, redutores planetários de precisão, Redutor, Redutor e Motorredutor, Redutores e Variadores, Controlador de motor paso a paso, Motores paso a paso, Acessórios de Inversor de frequência, Acessórios para inversores(conversores) de frequência, Unidade de frenagem, chopper de frenagem, Módulo de Frenagem, Resistências de frenagem, Resistor de Frenagem Carcaça Alumínio, Banco de Resistências, Reatores de entrada e saída, Filtros De Onda Senoidal
Copyright © 2010-2011 NIETZ. All Right Reserved.