Características Especificaciones Appliaction Descargar
Productos Componentes de Control Controladores de temperatura
TS-800 Series Multi-Loop Modular Temperature Controller
TS-800 Series Multi-Loop Modular Temperature Controller
TS-800 Series Multi-Loop Modular Temperature Controller
TS800 9
TS800 10
TS800 11
TS-800 Series Multi-Loop Modular Temperature Controller

The TS-800 is a slim, DIN-rail-mounted Multi-Loop Modular Temperature Controller. It accepts thermocouple or thermal-resistance (RTD) sensor inputs and supports up to six independent control loops.

The circuit design uses premium high-precision, high-performance components, which substantially strengthen noise immunity while reducing temperature drift. Cross-channel interference between the N channels is fully addressed, so the measurement accuracy of a multi-loop module is on the same level as that of a single-loop instrument. The module can be used online with touch panels, computers or PLCs through its RS-485 interface.

 Contrôleurs de température, Régulateur de Températur, Controlador de Temperature, temperaturni kontroleri, Регулаторите на температурата ; терморегулатори;Температурни контролери; Термоконтролер, PID Sıcaklık Kontrol Cihazları, CONTROLE DA TEMPERATURA, Controlador de Temperatura, Regulator temperatury, Kontroler temperatury

Características

Key Features
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 

1.  LED digital display; supports up to 6 independent temperature-control and communication loops.

2.  Ultra-slim housing, only 22.5 mm wide, for quick standard DIN-rail mounting.

3.  Automatic or key-based manual channel switching for display, making multi-loop data easy to read and simple to operate.

4.  High-precision, low-drift components ensure measurement accuracy; anti-crosstalk signal design between channels delivers single-loop accuracy and noise immunity even with multiple channels.

5.  Each loop can be set independently to absolute-value or deviation alarms on the upper and lower limits; the alarm output points (AL1–AL2) are programmable.

6.  RS-485 communication interface with Modbus RTU protocol support.

7.  High-performance power supply: protected against over-voltage, over-current, surge and electromagnetic interference.

8.  Industrial-grade EMC with excellent noise immunity.

9.  Bottom quick-connect terminals allow several controllers to be linked together quickly, eliminating repeated wiring.

TS800 1.png TS800 2.png 

  TS800 4.png  TS800 3.png

TS800 5.png  TS800 6.png


Especificaciones

Item

Specification

Power supply

24 VDC ±10 %; 100–240 VAC   version available on request

Control output

4-loop and 6-loop SSR   (solid-state relay) outputs

Control mode

Code 4: two-position PID   control; code 8: dual-channel PID control (see ordering code)

Display

LED digital display

Alarm output

2 SSR alarm outputs

Measurement accuracy

±0.5 % FS ±1 digit

Communication

RS-485

Input channels

4 or 6

Control cycle

0.2 s per 6 loops

Input types

E, J, K, N, Pt100; other   sensors customizable

Dimensions (W × H × D)

22.5 × 108.4 × 115 mm

Baud rate

1.2K–38.4K bps, factory   setting 19.2K

Power consumption

≤ 5 VA

Operating environment

Atmospheric pressure   86–106 kPa; ambient temperature −10 to 50 °C; relative humidity 45–85 %RH