+86-13764513349
Ürün:Crowbar Resistors
Kategori:Power Electronics
Crowbar resistors are used to suppress transient or short-duration voltage peaks and can also be used to control longer lasting over-voltages. Crowbar resistors are three phase resistance banks which are connected to the rotor windings of the DFIG (Doubly-Feed Induction Generator) such as wind power generator.
 BROCHURE  
Özellikler
Uygulama Alanları
Döküman İndir
The crowbar resistors should be high enough to limit the short circuit rotor current and also they should be low enough to avoid too high voltage in the rotor circuit. The crowbar resistor should be designed with low inductance and capable of handling very high currents for short periods.
 
 Power parts with in the Inverter can be damaged as a result of over voltages power supply failures or other faults. Therefore an extensive protection system should be there to reduce the likelihood of damage to the inverter. 
 
Crowbar resistors are designed to handle high power loads for limited periods. They are compact, light weight, low maintenance and very reliable. 

Technical Feature

Items Standard
Power Range 31-300KW
Voltage Range <5KV
Value Range 0.05R-100R
Dielectric Strength AC3KV/1min 50Hz
Insulation Resistance 100MΩMin
IP Class IP20-IP23 optional)
Rated Temperature Rise 375°C
Temperature drift: 400-1260ppm/℃
Vibration No visible damage Free of breakdown or flying arc △R≤±(1%R.+0.05Ω)
 
版权说明   |   联系我们   |   网站地图   |   给我留言
Copyright © 2010-2011 NIETZ. All Right Reserved.
Яндекс.Метрика